Samstag, 4. Juli 2009

11.) [10.5] BIOS Settings

Because BIOS Settings are somewhat critical I'm posting mine. Take care off correct DRAM Voltage. I had an quiet instable system in the beginning. My SDRAM runs at 1066 Mhz (533Mhz x2) and my OCZ modules needs 2,2 V at that speed.

Other important settings:
  1. Hard Disk Boot Priority - The USB-Stick must be the first
  2. First Boot Device - USB-HDD or Hardisk
  3. SATA AHCI Mode - AHCI
  4. Green LAN - disabled
  5. HPET Support - enabled (I'm using 64 Bit)









Keine Kommentare:

Kommentar veröffentlichen